Cap-TubeTM Coin Tubes for Air-Tite Capsules

Cap-Tube Air-Tite Capsule Storage Tube The unique Cap-TubeTM coin tube is a clear, high quality coin tube designed to hold 20 Air-Tite coin holders. The tubes feature a welded bottom and snug fitting slip on cap that forms a vacuum type seal when closed.  These tubes contain no PVC and are excellent for long term storage of your Air-Tite encapsulated coins.

(Click images for closer view)
Cap-Tube Welded Bottom

Roll of Morgan Dollars in Cap-Tube
Photo courtesy of valued customer, Mike B., Illinois
Click photos for larger images

How To Assemble Cap-TubeTM Air-Tite Tubes

To put the end cap on the tube you will need to apply steady pressure to the end cap for several seconds. This will allow the air to completely escape from the tube and form a proper seal. If the cap tries to pop off when you remove pressure, continue pushing the cap onto the tube for a few seconds longer. When you remove pressure the cap should remain in place with a vacuum like seal.

How To Remove Cap-TubeTM Caps

Removing the caps creates a vacuum type effect inside the tube, so you may need to pull on the cap with steady pressure for several seconds in order to slowly remove it from the tube. Slightly twisting the cap during this process may also be helpful. The caps are designed to fit very snug onto the tube.

Save 15¢ each on 10 or more!  
Mix and match sizes!
Made In The USA
Measurements Product Description Price Quantity
4.25" x 1.22"
(107.95mm x 30.98mm)
  Cap-TubeTM Model A (fits all "A" model Air-Tites) $1.50
4.25" x 1.45"
(107.95mm x 36.83mm)
  Cap-TubeTM Model T (fits "T30" model Air-Tite) $1.50
5.0" x 1.77"
(127.0mm x 44.95mm)
  Cap-TubeTM Model H (fits all "H" model Air-Tites) $1.50
4.75" x 2.035
(120.65mm x 51.69mm)
  Cap-TubeTM Model I (fits "I" model Air-Tite) $1.50

Disclaimer: does not manufacture any of the products sold on this website.

© 2001-2014 All Rights Reserved.